Play clip at half speed?

alldaron_abe39-2-2 · January 10, 2016, 9:13pm

Is there any way to set the clip to play at 1/2 speed once we have gone thru and tracked it, just to watch it a tad slower.
Sometimes clips are too fast and even with the stabilize function seem a bit dizzying.

Thanks,
Alldaron

martinb · January 11, 2016, 1:12am

Presently not. Your best bet is to scrub slowly or advance frames yourself using CMD/CTRL + arrow keys.

alldaron_abe39-2-2 · January 25, 2016, 9:51pm

Thanks for the reply. Also I happened to stumble across holding shift/command moves points at reduced speed. Not sure if that was mentioned somewhere and I just missed it, but useful function.